Product

RapiClear® selection guide

iSpacer®

iSpacer® (imaging Spacer)

Keeping biological tissue in good shape


iSpacers are made from different thickness adhesive tape. By simply pressing a spacer to a microscope slide or coverslip, a sealed watertight well is formed to contain RapiClear® in place and prevents evaporation. The wells steady and support thick and free-floating specimens allowing resolution of internal fine structure without compression. The specimen and spacer can be sandwiched between two coverslips. Meanwhile, iSpacers can be stacked to different depth desired for direct use with light, fluorescence, or confocal microscopy.

Product Specifications:

Cat. #

Product Descriptions

IS001

one well, around 100 μl working volume, 26 x 16 mm, 0.2 mm deep, set of 50 sheets

IS002

one well, around 250 μl working volume, 26 x 16 mm, 0.5 mm deep, set of 50 sheets

IS003

one well, around 500 μl working volume, 26 x 16 mm, 1.0 mm deep, set of 50 sheets

IS004

one well, around 1.5 ml working volume, 26 x 16 mm, 3.0 mm deep, set of 10 pieces

IS005

one well, around 3.5 ml working volume, 26 x 16 mm, 7.0 mm deep, set of 10 pieces

IS006

four wells, around 12 μl working volume per well, 7 mm diameter, 0.18 mm deep, set of 50 sheets

IS007

four wells, around 15 μl working volume per well, 7 mm diameter, 0.2 mm deep, set of 50 sheets

IS008

four wells, around 35 μl working volume per well, 7 mm diameter, 0.5 mm deep, set of 50 sheets

IS009

four wells, around 75 μl working volume per well, 7 mm diameter, 1.0 mm deep, set of 50 sheets

   


Address: 4F., No.11, Ln. 22, Bo’ai St., East Dist., Hsinchu City, 30068, Taiwan.| TEL: 886-3-5165085 FAX: 886-3-5165087
Copyright© 2014 SunJin Lab Co. ALL RIGHTS RESERVED. Webmaster: sunjinlab@gmail.com,  daniel@sunjinlab.com